Word associations

[Mike Stenson (RIP)]

shears

[Mike Voden (RIP)]

scythe

[Mike Stenson (RIP)]

snaith

[georg ruf jr.]

Come on Mike.   cuqui
You're just testing your moderator.   
What's that mean?? 

[Mike Stenson (RIP)]

snaith

The wooden handle/shaft of a scythe.... 

[georg ruf jr.]

Couldn't find it. Okay, you're rehabilitated... 

[Mike Voden (RIP)]

Mike S, from my memory, I think the handle is called a snath not snaith but good try.............

[Mike Stenson (RIP)]

A scythe consists of a wooden shaft about 170 centimetres (6 ft) long called a snaith, snath, snathe or sned (modern versions are sometimes made from metal or plastic). The snaith may be straight, or with an "S" curve, but the more sophisticated versions are curved in three dimensions, allowing the mower to stand more upright. The snaith has either one or two short handles at right angles to it — usually one near the upper end and always another roughly in the middle. A long, curved blade about 60 to 90 centimetres (24 to 35 in)) long is mounted at the lower end, perpendicular to the snaith. Scythes always have the blade projecting from the left side of the snaith when in use, with the edge towards the mower. In principle a left-handed scythe could be made, but it could not be used together with right-handed scythes in a team of mowers, as the left-handed mower would be mowing in the opposite direction.

[Mike Voden (RIP)]

Thanks for the enlightenment Mike S, now for the next word.....

HANDLE

[Mike Stenson (RIP)]

door

[Barbara Eia (Brownless)]

Bell

[georg ruf jr.]

Graham

[Mike Voden (RIP)]

Alexander

[georg ruf jr.]

gout
cuqui

[Mike Voden (RIP)]

Mike (A)